Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
uboot_cp1
Example
Copy U-Boot to flash.
Hi1710_UBOOT> uboot_cp1
During the upgrade, ensure that the PCB is powered on and is not in the reset process, or the upgrade will fail, or even worse, the
PCB cannot work normally.
erase flash from :40100000 to :4017ffff,please wait a while
- Warning: 4 protected sectors will not be erased!
done
Erased 4 sectors
Copy u-boot to flash,please wait a while
erase flash from :401e0000 to :401fffff,please wait a while
- Warning: 1 protected sectors will not be erased!
done
Erased 1 sectors
Protect Flash Sectors 0-15 in Bank # 1
Success to load u-boot1.please update uboot0 and uboot1 in a uboot update process.
