No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 2800 V5 V500R007

This document is applicable to OceanStor 2800 V5. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
eam showglobaldbtable

eam showglobaldbtable


The eam showglobaldbtable command is used to view the global DB information.


eam showglobaldbtable node_id table_type index





node_id Controller ID.


table_type The type of DB table.

The value can be "0,2,3,4,7,8,9,10,11,12", where:

  • "0": Device information.
  • "2": Port configuration information.
  • "3": Ethernet port configuration information.
  • "4": Ethernet port Ipv6 configuration information.
  • "7": Loop map information.
  • "8": Route information.
  • "9": VLAN information.
  • "10": Logical port information.
  • "11": Failover group information.
  • "12": Logical port route information.
  • "13": Interface module configuration information.
  • "14": Ethernet port configuration information.
  • "15": Ethernet port IPv6 configuration information.
  • "16": IPv4 configuration information.
  • "17": IPv6 configuration information.
index Index.

When the value of table_type is 0, the value of index can only be 0.


Diagnostic view

Usage Guidelines



View the global DB information.

admin:/diagnose>eam showglobaldbtable 0 0 0
----------EAM NODE DB (table=0x0) Info----------
table name:      DEV_INFO_TABLE
index:      0
uiMagic             = 0x1b67f
szProductName       = 5800_V3
szProductSn         = 210235980510EC000003
szProductOwner      = HW000001
szProductBrand      = OceanStor
szOEMProductName    = 5800_V3

System Response


Updated: 2020-01-17

Document ID: EDOC1000181575

Views: 721940

Downloads: 31

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next