Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show dedup_lun scrub
Parameters
Parameter |
Description |
Value |
|---|---|---|
| lun_id=? | LUN ID. | To obtain the value, run the "show lun general" command. |
Example
Query scanning details on a deduplication LUN.
developer:/>show dedup_lun scrub lun_id=1 Lun ID : 1 Running Status : Finished Range : All Mode : All Speed : Normal Start Time : 2015-03-24/14:17:44 UTC+08:00 End Time : 2015-03-24/14:17:44 UTC+08:00 Checksum Errors : 0 Stripe Errors : 0 Other Errors : 0 Process(%) : 100 Total Scaned Capacity(Byte) : 1069056 Scrubing Speed(Bps) : 1069056
System Response
The following table describes the parameter meanings.
Parameter |
Meaning |
|---|---|
| Lun ID | LUN ID. |
| Running Status | Running status. |
| Range | Scanning range. |
| Mode | Scanning mode. |
| Speed | Scanning speed. |
| Start Time | Start time. |
| End Time | End time. |
| Checksum Errors | Check and the number of check errors. |
| Stripe Errors | Number of stripe check errors. |
| Other Errors | Number of other errors. |
| Process(%) | Progress. |
| Total Scaned Capacity(Byte) | Total scanned capacity. |
| Scrubing Speed(Bps) | Real scanning speed. |
