No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 2800 V5 V500R007

This document is applicable to OceanStor 2800 V5. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show system_disk upgrade_status

show system_disk upgrade_status


The show system_disk upgrade_status command is used to display the upgrade status of system disks.


show system_disk upgrade_status [ controller=? ]





controller ID of a controller or smart enclosure.

The value of a controller is in the format of "XA", "XB", "XC", or "XD", where the "X" is an integer ranging from 0 to 3. To obtain the value, run "show controller general".

The value of a smart enclosure is in the format of "DAEXXX.A" or "DAEXXX.B", where the "X" is a hexadecimal number ranging from 0 to F. To obtain the value, run "show expansion_module".


Developer view

Usage Guidelines

  • Run the "show system_disk upgrade_status" command to query the upgrade information of all system disks.
  • Run the "show system_disk upgrade_status controller=?" command to query the upgrade information of system disks on the specified node.


Query the upgrade information of all system disks.

developer:/>show system_disk upgrade_status
Controller  Slot     Upgrade Status
------------ ------------ ----------------
0A      23      Success
0B      24      Executing

System Response

The following table describes the parameter meanings.




Controller ID.


Slot ID.

Upgrade Status

Upgrade status.

Updated: 2020-01-17

Document ID: EDOC1000181575

Views: 731248

Downloads: 32

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next