No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 2800 V5 V500R007

This document is applicable to OceanStor 2800 V5. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
nm

nm

Function

The nm command is used to modify the memory.

Format

nm [.b, .w, .l] address

Parameters

Parameter

Description

Value

address

Memory address to be written.

Enter the value as required.

Modes

serial port mode

Usage Guidelines

None

Example

Modify the memory by long word.

Hi1710_UBOOT> nm.l 0x82000000                                                                                                        
82000000: 00001234 ? 56784321                                                                                                        
82000000: 56784321 ?

System Response

None

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181575

Views: 669439

Downloads: 30

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next