rephc queryarrayinfo
Function
Example
Query the compatibility information about HyperMetro arrays.
admin:/diagnose>rephc queryarrayinfo
Get REPHC array compatible info: arrayid(0).
arrayId :0
hcIsCompatible :1
NashcIsCompatible :1
sanhcVersion :1
nashcVersion :257
isSupportSan :1
isSupportNas :1
sanioVersion :196608
nasioVersion :196608
fsioVersion :100
domainIsCompatible :1
domainVersion :1
isSupportSync3dc :1
isSupportLunAlua :1
isSupportAutoRec :1
isSupportOptLock :1
isSupportSlvRecover :1
isSupportIoErrFwd :1
isSupportConfigFwSwitch :1
isSupportArbMode :1
isSupportCgAddNormalPair :1
isSupportDoubleCps :1
isSupportLunExpand :1
isSupportEnterpriseWorm :1
isSupportAtomicCopy :1
isSupportNew2Cps :1
isSupportCrtPause :1
isSupNormUpgrade :1
ioCapVersion :0
isSupportDoubleCps :1
sanAbility :1 note -- 0bit: support disguise lun
System Response
The following table describes the parameter meanings.
Parameter |
Meaning |
|---|---|
| arrayId | Array ID. |
| hcIsComPatible | Whether two arrays are compatible with SAN HyperMetro. |
| NashcIsCompatible | Whether two arrays are compatible with NAS HyperMetro. |
| sanhcVersion | SAN HyperMetro version. |
| nashcVersion | NAS HyperMetro version. |
| isSupportSan | Whether SAN HyperMetro is supported. |
| isSupportNas | Whether NAS HyperMetro is supported. |
| sanioVersion | Block I/O version. |
| nasioVersion | Object I/O version. |
| fsioVersion | File system I/O version. |
| domainIsCompatible | Whether two arrays are compatible with a HyperMetro domain. |
| domainVersion | Disk domain version. |
| isSupportSync3dc | Whether the HyperMetro solution can be expanded to the DR Star solution. |
| isSupportLunAlua | Whether ALUA is supported. |
| isSupportAutoRec | Whether automatic recovery is supported when two arrays are powered off concurrently. |
| isSupportOptLock | Whether the optimistic lock is supported. |
| isSupportSlvRecover | Whether HyperMetro dual secondary arrays support automatic recovery. |
| isSupportIoErrFwd | Whether I/O errors can be forwarded to the HyperMetro primary end for processing. |
| isSupportConfigFwSwitch | Whether the partition configuration synchronization switch is supported. |
| isSupportArbMode | Whether the preferred site mode can be manually set for a vStore pair. |
| isSupportCgAddNormalPair | Whether normal members can be added to a HyperMetro consistency group. |
| isSupportDoubleCps | Whether dual arbitration is supported. |
| isSupportLunExpand | Whether LUN capacity expansion is supported. |
| isSupportEnterpriseWorm | Whether enterprise-level WORM is supported. |
| isSupportAtomicCopy | Whether atomic copy is supported. |
| isSupportNew2Cps | Whether new dual-arbitration is supported. |
| isSupportCrtPause | Whether to support the function of suspending a HyperMetro consistency group by default. |
| isSupNormUpgrade | Whether an upgrade can be performed without suspending SAN HyperMetro services. |
| ioCapVersion | HyperReplication I/O capability version. |
| sanAbility | HyperMetro I/O capability version. |
| isSupNormUpgradeMv | Whether an upgrade can be performed without suspending intra-array HyperMetro services. |
Previous
