Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
pmgr showsysbitmap
Function
The pmgr showsysbitmap command is used to query information about the current system bitmap.
Format
pmgr showsysbitmap
Parameters
None
Views
Diagnostic view
Usage Guidelines
None
Example
Query information about the current system bitmap.
admin:/diagnose>pmgr showsysbitmap
Local nodeId : 0
Node num : 2
Sys bitmap : 3
Nodegroup ID : 0
Used array : 0 1 65535 65535
Nodes Bitmap : 0 1 65535 65535
admin:/diagnose>
System Response
The following table describes the parameter meanings.
Parameter |
Meaning |
|---|---|
Local nodeId |
ID of the current node. |
Node num |
Number of controllers in the current engine. |
Sys bitmap |
System bitmap information. |
Nodegroup ID |
ID of the current engine. |
Used array |
Information about the currently used bitmap. |
Nodes Bitmap |
Saved information about the system bitmap. |
Previous
