Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
reboot expansion_module
Parameters
Parameter |
Description |
Value |
|---|---|---|
| expansion_module_id=? | Expansion module ID. | To obtain the value, run "show expansion_module". The value contains 1 to 31 characters, including letters, digits, and periods (.). The value cannot start with a digit or a period (.), or end with a period (.). |
Usage Guidelines
- Run show expansion_module to query information about all the expansion modules.
- Run reboot expansion_module expansion_module_id=? to reset a specific expansion module.
- The expansion module is reset one minute after the command is executed.
Example
Resetting expansion module "DAE030.A".
developer:/>reboot expansion_module expansion_module_id=DAE030.A DANGER: You are about to reboot the expansion module. This operation causes the performance fluctuation of some disks or service termination. Suggestion: Before performing this operation, stop services running on the service ports of the controller to which the expansion module belongs. You are strongly advised not to reboot the expansion module when the expansion module is working correctly. Have you read danger alert message carefully?(y/n)y Are you sure you really want to perform the operation?(y/n)y Command executed successfully.
Previous
