delete hyper_metro_pair rsstype
Function
Format
delete hyper_metro_pair rsstype { lun_id=? | file_system_id=? } [ is_refresh_wwn=? ] [ local_pair_id=? ]
Parameters
Parameter |
Description |
Value |
---|---|---|
lun_id=? | LUN ID. | To obtain the value, run "show lun general". |
file_system_id=? | File system ID. | To obtain the value, run "show file_system general". |
is_refresh_wwn=? | Whether to refresh the LUN WWN (valid for SAN HyperMetro only). | The value can be "yes" or "no", where:
|
local_pair_id=? | ID of a HyperMetro pair. | To obtain the value, run "rephc showAllPairGdbInfo". |
Usage Guidelines
- Do not use this command without R&D engineers' guidance. This command can be used to cancel the value of "Lun Type" when the HyperMetro database is incorrect and the HyperMetro cannot be deleted on the CLI. Do not use this command in other scenarios.
- This command must be used with the "delete hyper_metro_db" command. Restart the system after running the commands.
Example
Delete the HyperMetro value-added information on LUN "0".
developer:/>delete hyper_metro_pair rsstype resource_id=0 DANGER: You are about to forcibly maintain the HyperMetro configuration. This operation will make the corresponding value-added pair unavailable. This operation enables you to forcibly delete a single configuration item of HyperMetro if HyperMetro objects cannot be deleted properly. Suggestion: Before performing this operation, contract R&D engineers and confirm the following: 1. The system is not being configured by other users. 2. Host I/Os of HyperMetro LUNs or file system have been stopped. 3. The entered parameter values are correct. You need to perform this operation under the guidance of R&D engineers. Have you read danger alert message carefully?(y/n)y Are you sure you really want to perform the operation?(y/n)y Command executed successfully.