No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 2800 V5 V500R007

This document is applicable to OceanStor 2800 V5. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
lm showsysevent

lm showsysevent

Function

The lm showsysevent command is used to check the system events of a LUN migration.

Format

lm showsysevent

Parameters

None

Views

Diagnostic view

Usage Guidelines

None

Example

To check the system events of a LUN migration, run the following command.

admin:/diagnose>lm showsysevent 
----system event type(LM_SYS_JOB_COMPLETE_EVENT), remain(0)---- 
----system event type(LM_SYS_JOB_FAULT_EVENT), remain(0)---- 
----system event type(LM_SYS_IO_ERROR_EVENT), remain(0)---- 
----system event type(LM_SYS_LUN_RECOVER_EVENT), remain(0)---- 
----system event type(LM_SYS_START_LUN_EVENT), remain(0)---- 
----system event type(LM_SYS_STOP_LUN_EVENT), remain(0)---- 
----system event type(LM_SYS_START_BGR_EVENT), remain(0)---- 
----system event type(LM_SYS_STOP_BGR_EVENT), remain(0)---- 
----system event type(LM_SYS_MASTER_RECOVER_EVENT), remain(0)---- 
----system event type(LM_SYS_XNET_DATA_LINKUP_EVENT), remain(0)---- 
----system event type(LM_SYS_SYNC_DB_LOG_TO_GDB), remain(0)---- 
----system event type(LM_SYS_LM_HEAL_EVENT), remain(0)----

System Response

The following table describes the parameter meanings.

Parameter

Meaning

system event type

System event type.

remain

Number of the events waiting to be processed.

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181575

Views: 644865

Downloads: 30

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next