No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 2800 V5 V500R007

This document is applicable to OceanStor 2800 V5. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
mp show speclun

mp show speclun


The mp show speclun command is used to query a specified heterogeneous remote LUN.


mp show speclun sdid=?





sdid=? ID of a SCSI device.

To obtain the value, run the "mp show lun" command.


Diagnostic view

Usage Guidelines



Query heterogeneous remote LUN "76".

admin:/diagnose>mp show speclun sdid=76
ID : 76
UUID : 60022a11000eaa2a015d38a700000001
Vendor ID : HUAWEI
Product ID : S2600T
Path Selector : round-robin
Default Tpg ID : 2
Current Tpg ID : 2
Failover Tag : NOT FAILOVER
Failback Times : 1
Status : RDY
Reference Count : 3

System Response

The following table describes the parameter meanings.




ID of a SCSI device.



Vendor ID

Vendor ID of the heterogeneous remote LUN.

Product ID

Product ID of the heterogeneous remote LUN.

Path Selector

Path selection algorithm for accessing the heterogeneous remote LUN.

Default Tpg ID

ID of the default target port group.

Current Tpg ID

ID of the current target port group.

Failover Tag

Status of the working controller failover of the heterogeneous remote LUN.

Failback Times

Times of the working controller failback of the heterogeneous remote LUN.


Status of the heterogeneous remote LUN.

Reference Count

Reference count.

Updated: 2020-01-17

Document ID: EDOC1000181575

Views: 728183

Downloads: 32

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next