Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show lun_reserve general
Function
The show lun_reserve general command is used to query reservation information about the remote LUNs that map to eDevLUNs.
Parameters
Parameter |
Description |
Value |
|---|---|---|
| edevlun_id=? | eDevLUN ID. | eDevLUN ID can be obtained by running the "show lun general usage_type=External" command. The ID in the command output is the eDevLUN ID. |
Usage Guidelines
This command applies only to heterogeneous takeover scenarios.
To take over heterogeneous storage arrays using Huawei storage arrays, create eDevLUNs, and map the eDevLUNs to host services, run the following commands:
- Run the "scan remote_lun" command.
- Run the "show lun_reserve general" command to query reservation information about remote LUNs that map to all eDevLUNs, or run the "show lun_reserve general edevlun_id=?" command to query reservation information about the remote LUN that maps to a specified eDevLUN.
If there is reservation information about the remote LUN that maps to the eDevLUN, run the "change lun_reserve clear" command to clear the reservation information. Otherwise, the services are interrupted.
Example
Query reservation information about the remote LUNs that map to eDevLUNs.
engineer:/>show lun_reserve general eDevLUN Id Type ---------- ---------------------------------- 0 Write Exclusive 1 Exclusive Access 2 Write Exclusive-Registrants Only 3 Exclusive Access-Registrants Only 4 Write Exclusive-All Registrants 5 Exclusive Access-All Registrants 6 Obsolete 7 Unknown 8 No Reservation
Previous
