No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 2800 V5 V500R007

This document is applicable to OceanStor 2800 V5. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ss showtask

ss showtask


The ss showtask is used to query information about the intelligent scan task.


ss showtask




Diagnostic view

Usage Guidelines



Query information about the intelligent scan task.

admin:/diagnose>ss showtask
Smart scan task info:
Scan switch: OPEN
Scan period: 60 minute
Scan status: Finish
Scan start utcTime: 2016-3-26, 0:51:13

System Response

The following table describes the parameter meanings.



Scan switch

Enables or disables the scan task.

Scan period

Scan period.

Scan status

Scan status.

Scan start utcTime

Scan start time.

Updated: 2020-01-17

Document ID: EDOC1000181575

Views: 724679

Downloads: 32

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next