No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 2800 V5 V500R007

This document is applicable to OceanStor 2800 V5. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show touch_lun general

show touch_lun general


The show touch_lun general command is used to show results of batch BST verification and repair.


show touch_lun general type=? controller=?





type=? Operation type.

The value can be "brief" or "detail", where:

  • "brief": queries brief information.
  • "detail": queries details.
controller=? ID of a controller.

To obtain the value, run "show controller general".


Developer view

Usage Guidelines



  • Show brief information about verification and repair.

    developer:/>show touch_lun general type=brief controller=0A
    Processing LUN ID: 2
    Processing Progress(%): 40
    Remain Time(s): 30
    Waiting LUN IDs: 3,4,5
    Scan Successful LUN IDs: 10,11,12
    Update Successful LUN IDs: 13,14,15
    Scan Failed LUN IDs: 16,17
    Update Failed LUN IDs: 18,19
  • Show details about errors detected during verification.

    developer:/>show touch_lun general type=detail controller=0A
    ID  LBA   Length  Time
    -- -------- -------- ------------------
    1  192    10   2016-4-2 11:20:31
    2  45    100   2016-4-2 12:10:22

System Response

The following table describes the parameter meanings.



Processing LUN ID

LUN ID that is being processed.

Processing Progress(%)

Processing progress.

Remain Time(s)

Estimated remaining processing time.

Waiting LUN IDs

LUN IDs that are waiting to be processed.

Scan Successful LUN IDs

LUN IDs that are verified successfully.

Update Successful LUN IDs

LUN IDs that are repaired successfully.

Scan Failed LUN IDs

LUN IDs that failed to be verified.

Update Failed LUN IDs

LUN IDs that failed to be repaired.




Inconsistent LBA.


Inconsistent location length.


Operation time.

Updated: 2020-01-17

Document ID: EDOC1000181575

Views: 729124

Downloads: 32

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next