No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 2800 V5 V500R007

This document is applicable to OceanStor 2800 V5. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show statistics ftp_connection

show statistics ftp_connection

Function

The show statistics ftp_connection command is used to query the FTP connection information.

Format

show statistics ftp_connection [ controller=? ]

Parameters

Parameter

Description

Value

controller=?

Indicates the controller ID.

The value is in the format of "XA", "XB", "XC", or "XD", where "X" indicates an integer from 0 to 3, for example, "0A" or "1C".

Views

Developer view

Usage Guidelines

If this command is executed without parameters, this command is executed on the primary node.

Example

Query the FTP connection information.

developer:/>show statistics ftp_connection controller=0A 
Client Ip     User Name Port  Connect Time(Sec)  
----------- --------- ----  ------------ 
10.99.2.11 ftp-user1 8932 3 
10.99.3.12 ftp-user2 8765 10 
10.99.3.15 ftp-user3 8623 15

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Client Ip

Indicates the IP address used by the client to access the FTP.

User Name

Indicates the user name used by the client to access the FTP.

Port

Indicates the port used by the client to access the FTP.

Connect Time(Sec)

Indicates the time duration when the client is connected.

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181575

Views: 648911

Downloads: 30

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next