Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
dmi.sh
Function
The dmi.sh command is used to run commands related to the DMI module.
Format
dmi.sh {showbbustatus}
Parameters
Parameter |
Description |
Value |
|---|---|---|
showbbustatus |
Shows the status of all BBUs visible to the local controller. |
- |
Modes
Minisystem mode
Usage Guidelines
Users can execute the "dmi.sh showbbustatus" command to query the status and remaining power of all BBUs visible to the local controller.
Example
Show the status of all BBUs visible to the local controller.
Storage: minisystem> dmi.sh showbbustatus
ibc_os_hs:/diagnose>dpl showbbustatus
BBU0:
State:FULL
HealthStatus:NORMAL
RemainPower:98%
BBU1:
State:FULL
HealthStatus:NORMAL
RemainPower:100%
BBU2:
State:FULL
HealthStatus:NORMAL
RemainPower:100%
BBU3:
State:FULL
HealthStatus:NORMAL
RemainPower:99%
System Response
None
Previous
