Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
delete disk_bom whitelist
Parameters
Parameter |
Description |
Value |
|---|---|---|
| bom_list | Disk item. | The value contains 1 to 16 disk items. The length of each disk item is eight bytes and disk items are separated by commas (,). Each disk item can contain digits and letters only. |
| force | Forced execution. | The value is "yes" or "no", where:
|
Usage Guidelines
- In the disk access process, do not run this command.
- This command is invalid for disks that have connected to the system, and is valid for newly connected disks and reconnected disks (reinserted disk, reset disk, or reset system).
- In the following condition, a disk item cannot be deleted.
- The check status of the BOM list is off.
Example
Delete disk items from a BOM whitelist.
developer:/>delete disk_bom whitelist bom_list=0235G6BB,0235G6BC WARNING: You are about to delete disk items from the BOM whitelist.This operation may change whether the disk whose item is specified can be connected to the system. Suggestion: Before performing this operation, confirm that the type of the BOM list and disk item are correct. Have you read warning message carefully?(y/n)y Are you sure you really want to perform the operation?(y/n)y Delete BOM 0235G6BB successfully. Delete BOM 0235G6BC successfully.
