Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
pair showerrorio
Usage Guidelines
If the pair module is abnormal, you can run this command to view I/O errors on the pair module.
Example
Viewing I/O errors on the pair module.
admin:/diagnose>pair showerrorio Seq Operation Time Opcode VolumeId ObjectId ObjectLba Length Result SlaveStartTime CurrentTime Deadline RetryTimes --- ---------------- ------------------- ---------- ---------------- ---------------- ---------------- ---------- ---------- ---------------- ---------------- ---------------- ---------- 4 PAIR_DW_ERROR 2017-02-09 10:06:34 320962560 368 1027 649315064 8 80004b85 166967678 166987679 166995678 3792
System Response
The following table describes the parameter meanings.
Parameter |
Meaning |
|---|---|
| Seq | Serial number of the I/O error. |
| Operation | Operation that causes the I/O error. |
| Time | Time when the I/O error occurs. |
| Opcode | Operation code. |
| VolumeId | Volume ID. |
| ObjectId | Object ID. |
| ObjectLba | Data start address. |
| Length | Data length. |
| Result | Returned value. |
| SlaveStartTime | Start time of writing the secondary LUN and FS. |
| CurrentTime | Current system time. |
| Deadline | End time of writing the secondary LUN and FS. |
| RetryTimes | Times of retrying to write the secondary LUN and FS. |
Previous
