Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
xnet calcrsp
Function
The xnet calcrsp command is used to view the number of the target controller's requests that get no response.
Parameters
Parameter |
Description |
Value |
|---|---|---|
| controller | Controller ID. | The value ranges from 0 to the number of controllers minus one. |
| log flag | Whether logs are printed. | The value can be 0 or 1.
|
Usage Guidelines
If some service messages get no response, you can run this command to view the number of messages that get no response in XNET and then use -f to print message properties into logs.
Previous
