snap showldbinfo
Parameters
Parameter |
Description |
Value |
---|---|---|
snapshotID=? | Snapshot ID. | The value ranges from 0 to n minus one. n indicates the maximum number of LUNs. |
Example
View details about a specific snapshot in the LDB.
admin:/diagnose>snap showldbinfo 4 DB Record Status : Used Snap LUN ID : 4 Source LUN ID : 0 Snap Type : Public Snap Pair Status : Active Snap Right Status : Write Active Time Point : 1 Active Time : 1325489 Restore DCL ID : Invalid Restore Speed : Invalid Restore Time Point : Invalid Restore Start Time : Invalid Restore Over Time : Invalid
System Response
The following table describes the parameter meanings.
Parameter |
Meaning |
---|---|
DB Record Status | GDB record status of snapshots. |
Snap LUN ID | ID of the snapshot LUN. |
Source LUN ID | ID of the source LUN. |
Snap Type | Snapshot type. |
Snap Pair Status | Running status of the snapshot. |
Snap Right Status | Read/write permission for the snapshot. |
Active Time Point | Point in time when the snapshot is activated. |
Active Time | Time when the snapshot is activated. |
Restore DCL ID | ID of the restore differential bitmap. |
Restore Speed | Restore speed. |
Restore Time Point | Restore time point. |
Restore Start Time | Time when the restore starts. |
Restore Over Time | Time when the restore ends. |