No relevant resource is found in the selected language.
MENU
Support Documentation
Advanced O&M Command Reference
OceanStor 2800 V5 V500R007

This document is applicable to OceanStor 2800 V5. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
drvunf showversion

drvunf showversion

Function

The drvunf showversion command is used to check the versions of the driver, hardware, and firmware on the Fibre Channel card.

Format

drvunf showversion

Parameters

None

Views

Diagnostic view

Usage Guidelines

None

Example

Check the versions of the driver, hardware, and firmware on the Fibre Channel card.

admin:/diagnose>drvunf showversion
UNF Driver Version:01.02.43.T04
Print port version in messages.

System Response

The following table describes the parameter meanings.

Parameter

Meaning
UNF Driver Version

Driver version.
Translation
简体中文
Download
Updated: 2020-12-07

Document ID: EDOC1000181575

Views: 1032847

Downloads: 50

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next
Enterprise APP

Copyright © 2021 Huawei Technologies Co., Ltd. All rights reserved.

You are going to visit :