Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
drvfc showlink
Function
The drvfc showlink command is used to view all the link information of 8 Gbit/s Fibre Channel ports.
Example
View all the link information of 8 Gbit/s Fibre Channel ports.
admin:/diagnose>drvfc showlink port |lnportid|rnportid|fc2Lgn(state) |fc4inilgn(state) | ------------|--------|--------|----------------------|----------------------| port(110500)|0x00009e|0x00009b|ffffc90016f89000(0x2 )|ffffc9001723c000(0x4 )| port(110502)|0x00009b|0x00009e|ffffc90019469000(0x2 )|ffffc9001971c000(0x4 )| fc4tgtlgn(state) |session |wwn | ----------------------|----------------|----------------| ffffc9001723c4e8(0x2 )|(null) |241a112233445566| ffffc9001971c4e8(0x2 )|(null) |2418112233445566|
System Response
The following table describes the parameter meanings.
Parameter |
Meaning |
|---|---|
| port | Port ID. |
| lnportid | Local port ID. |
| rnportid | Remote port ID. |
| fc2Lgn(state) | FC-2 layer link and status. |
| fc4inilgn(state) | FC-4 layer initiator link and status. |
| fc4tgtlgn(state) | FC-2 layer target link and status. |
| session | Assigned session. |
| wwn | Remote world wide name (WWN). |
