Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show file_system dirtydata
Function
The show file_system dirtydata command is used to check the details of dirty data exporting.
Format
show file_system dirtydata
Parameters
None
Views
Developer view
Usage Guidelines
None
Example
To check the details of dirty data exporting, run the following command.
developer:/>show file_system dirtydata
File System ID : 1
Status : ING
Backup File System ID : 2
Export Directory : /WARNING_CACHE_DIRTY_DATA/1/20121117102403
Info :
System Response
The following table describes the parameter meanings.
Parameter |
Meaning |
|---|---|
Status |
Exporting status. |
File System ID |
File system ID. |
Backup File System ID |
File system ID (ID of the file system where dirty data is saved). |
Export Directory |
Directory to which dirty data is exported (directory where dirty data is saved in backup_filesystem_id). |
Info |
Detailed information. |
Previous
