Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show space stage_info
Function
The show space stage_info command is used to query the I/O running status of a specified module.
Parameters
Parameter |
Description |
Value |
|---|---|---|
| sub_module=? | Indicates the sub module name. | The value could be: "io", "dmn", "sync", "object", "log", "scan", "sync_task", "vaai". |
| controller=? | Indicates the controller ID. | The value is in the format of "XA" or "XB" or "XC" or "XD", where the "X" is an integer ranging from 0 to 3, for example: "0A", "1C". |
| filter=? | Indicates the filter condition. | The value must be "hang" only. |
Example
To query the running status of "scan" sub module, run the following command.
developer:/>show space stage_info sub_module=scan controller=0A Stage Enter Exit Hanging Average Time ------------------------------ ----- ---- ------- ------------ scan read - (1/6)check flow 0 0 0 0 scan read - (2/6)lock tree 0 0 0 0 scan read - (3/6)read impl 0 0 0 0 scan read - (4/6)fill back 0 0 0 0 scan read - (5/6)bp info 0 0 0 0 scan read - (6/6)node info 0 0 0 0 scan object - (1/3)read bonus 0 0 0 0 scan object - (2/3)hold dmn 0 0 0 0 scan object - (3/3)read data 0 0 0 0 scan object - (1/2)scan bonus 0 0 0 0 scan object - (2/2)scan object 0 0 0 0 get capacity - (1/1)read data 0 0 0 0 scan bonus - (1/5)check flow 0 0 0 0 scan bonus - (2/5)lock obs 0 0 0 0 scan bonus - (3/5)read data 0 0 0 0 scan bonus - (4/5)fill back 0 0 0 0 scan bonus - (5/5)ckg info 0 0 0 0 scan objset - (1/2)get obj 0 0 0 0 scan objset - (2/2)scan impl 0 0 0 0 scan objset - (1/1)multi scan 0 0 0 0 multi scan - (1/1)object 0 0 0 0
