No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 2800 V5 V500R007

This document is applicable to OceanStor 2800 V5. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show lun_defrag general

show lun_defrag general


The show lun_defrag general command is used to query the switch status of thin LUN space defrag.


show lun_defrag general lun_id=?





lun_id=? ID of a thin LUN.

To obtain the value, run the "show lun general" command.


Developer view

Usage Guidelines

This command is used to query the switch status of thin LUN space defrag.


Query the space defrag switch status of thin LUN whose ID is "0".

developer:/>show lun_defrag general lun_id=0
Defrag Switch : Off

System Response

The following table describes the parameter meanings.



Defrag Switch

Switch of thin LUN space defrag.

Updated: 2020-01-17

Document ID: EDOC1000181575

Views: 721615

Downloads: 31

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next