Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
tgt show portlist
Function
The tgt show portlist command is used to query port information about a specific port group.
Parameters
Parameter |
Description |
Value |
|---|---|---|
| portgroupid | Port Group ID. | To obtain the value, run "show port_group general". |
Example
View port information about port group 0.
admin:/diagnose>tgt show portlist 0 **************************** The Port Info ********************************* ** Port Physical ID: 0x110300 ** PortGroup IDS: ID: 0 , End ** MapView IDS: End **************************** END ************************************* **************************** The Port Info ********************************* ** Port Physical ID: 0x110301 ** PortGroup IDS: ID: 0 , End ** MapView IDS: End **************************** END ************************************* **************************** The Port Info ********************************* ** Port Physical ID: 0x110303 ** PortGroup IDS: ID: 0 , End ** MapView IDS: End **************************** END *************************************
Previous
