No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 2800 V5 V500R007

This document is applicable to OceanStor 2800 V5. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change upgrade port_failover_switch

change upgrade port_failover_switch


The change upgrade port_failover_switch command is used to enable or disable the failover function for SAN service ports in an upgrade.


change upgrade port_failover_switch switch=?





switch Whether to enable the failover function for SAN service ports in an upgrade.

The value can be "on" or "off", where:

  • "on": enables the failover function in an upgrade.
  • "off": disables the failover function in an upgrade.
The default switch status of the failover function in an upgrade is "on".


Developer view

Usage Guidelines

Before performing this operation, determine whether the modification is necessary. If the switch of the failover function is modified during an upgrade, the modification takes effect temporarily and does not persist. After controllers are restarted, the switch is restored to the status before the modification.


Disable the failover function for SAN service ports in an upgrade.

developer:/>change upgrade port_failover_switch switch=off
Command executed successfully.

System Response


Updated: 2020-01-17

Document ID: EDOC1000181575

Views: 724819

Downloads: 32

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next