No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 2800 V5 V500R007

This document is applicable to OceanStor 2800 V5. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
restore disk general

restore disk general


The restore disk general command is used to restore an isolated member disk.


restore disk general disk_id=?





disk_id=? ID of the disk.

To obtain the value, run the "show disk general" command without parameters.


Developer view

Usage Guidelines

The restore disk general command is executed in asynchronous mode. After the CLI returns a success message, the disk is restored in the background.

During asynchronous execution, if a controller or an enclosure is reset or the restoration fails, the disk may still be faulty in 5 minutes. You are advised to run this command again to rectify the fault.

If the fault persists, collect related log information and contact technical support engineers to replace the disk or analyze the fault.


Restore an isolated member disk.

developer:/>restore disk general disk_id=DAE000.0
WARNING: You are about to restore an isolated member disk. This operation connects an identified risky disk (such as a failed or faulty disk) to the system, which may cause data loss.
Suggestion: Before performing this operation, ensure that the isolated member disk needs to be recovered.
Have you read warning message carefully?(y/n)y
Are you sure you really want to perform the operation?(y/n)y
Command executed successfully.

System Response


Updated: 2020-01-17

Document ID: EDOC1000181575

Views: 728320

Downloads: 32

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next