Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change cifs log_level
Function
The change cifs log_level command is used to set the log level for the cmr_cm, cmr_store, cmr_auth, or cmr_msrpc module.
Format
change cifs log_level module=? log_level=? [ controller=? ]
Parameters
Parameter |
Description |
Value |
|---|---|---|
module=? |
Module name. |
The value can be "cmr_cm", "cmr_auth", "cmr_store", or "cmr_msrpc", where:
|
log_level=? |
Log level. |
The value can be "ERROR", "WARN", or "DEBUG", where:
|
controller=? |
Controller ID. |
The value is in the format of "XA" or "XB" or "XC" or "XD", where the "X" is an integer ranging from 0 to 3, for example: "0A", "1C". |
Views
Developer view
Usage Guidelines
None
Example
- Set the log level of the cmr_cm module to "DEBUG".
developer:/>change cifs log_level module=cmr_cm log_level=DEBUG Command executed successfully.
- Set the log level of the cmr_cm module to "DEBUG" on controller B.
developer:/>change cifs log_level module=cmr_cm log_level=DEBUG controller=0B Command executed successfully.
System Response
None
Previous
