Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
drveth showports
Function
The drveth showports command is used to query information about physical ports on a network adapter.
Example
Query information about physical ports on a network adapter.
admin:/diagnose>drveth showports List All Ports Registered: Port ID: 0x00022002 Nic Name: eth0 Switch state: Port open Physics Link: LinkUp Max Speed: 100000Mb/s,autoneg on,duplex full Current Speed:100000Mb/s,autoneg on,duplex full Pci Bus: 0000:00:00.0 Driver Type: hns3
System Response
The following table describes the parameter meanings.
Parameter |
Meaning |
|---|---|
| Port ID | ID of a physical port on the network adapter. |
| Nic Name | Name of a physical port on the network adapter. |
| Switch state | Status of a physical port on the network adapter. |
| Physics Link | Physical link status of a physical port on the network adapter. |
| Max Speed | Performance indicator supported by a physical port on the network adapter. |
| Current Speed | Connection parameter of a physical port on the network adapter. |
| Pci Bus | PCI bus ID of a physical port on the network adapter. |
| Driver Type | Driver type of the network adapter. |
