Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
add disk_bom blacklist
Parameters
Parameter |
Description |
Value |
|---|---|---|
| bom_list | Disk item. | The value contains 1 to 16 disk items. The length of each disk item is eight bytes and disk items are separated by commas (,). Each disk item can contain digits and letters only. |
| force | Forced execution. | The value is "yes" or "no", where:
|
Usage Guidelines
- In the disk access process, do not run this command.
- This command is invalid for disks that have connected to the system, and is valid for newly connected disks and reconnected disks (reinserted disk, reset disk, or reset system).
- In the following conditions, a disk item cannot be added.
- The disk item already exists in the BOM whitelist.
- The disk item is added to the BOM blacklist.
- The check status of the BOM list is off.
- The BOM list is full.
Example
Add disk items to a BOM blacklist.
developer:/>add disk_bom blacklist bom_list=0235G6BB,0235G6BC WARNING: You are about to add disk items to the BOM blacklist.This operation may change whether the disk whose item is specified can be connected to the system. Suggestion: Before performing this operation, confirm that the type of the BOM list to be set and the item are correct. Have you read warning message carefully?(y/n)y Are you sure you really want to perform the operation?(y/n)y Add BOM 0235G6BB successfully. Add BOM 0235G6BC successfully.
Previous
