No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 2800 V5 V500R007

This document is applicable to OceanStor 2800 V5. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show hyper_metro_vstore_pair remaincfglog

show hyper_metro_vstore_pair remaincfglog


The show hyper_metro_vstore_pair remaincfglog command is used to query configuration logs reserved by a specific HyperMetro vStore pair.


show hyper_metro_vstore_pair remaincfglog pair_id=?





pair_id=? HyperMetro vStore pair ID.

To obtain the value, run the "show hyper_metro_vstore_pair general" command.


Developer view, vstore developer view

Usage Guidelines



Query configuration logs reserved by the HyperMetro vStore pair whose ID is "200bc79b99520000".

developer:/>show hyper_metro_vstore_pair remaincfglog pair_id=200bc79b99520000
Log ID     Exec Result Config Info
---------- ----------- ----------------------------------------------------------------------------------
3221225472 Success     create resource group: name = res21, group id = 100001, comment =
3271557120 Success     protocal config change: key: cifs_enable value: true, key: smb1_enable value: true

System Response

The following table describes the parameter meanings.



Log Id

Configuration log ID.

Exec Result

Execution result.

Config Info

Configuration information.

Updated: 2020-01-17

Document ID: EDOC1000181575

Views: 724837

Downloads: 32

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next