No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 2800 V5 V500R007

This document is applicable to OceanStor 2800 V5. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change disk fault

change disk fault

Function

The change disk fault command is used to enable a specific disk to faulty.

Format

change disk fault disk_sn=?

Parameters

Parameter

Description

Value

disk_sn=?

Disk SN.

-

Views

Developer view

Usage Guidelines

None

Example

Enable a specific disk to faulty.

developer:/>change disk fault disk_sn=KWJE60GF 
DANGER: You are about to enable a disk to be fault. This operation may cause system exceptions. 
Suggestion: Before running this command, pay attention to the following: 
1. Only a technical support engineer or a higher-level engineer can run this command. 
2. This operation will enable the specified disk to be logical fault. That disk may be isolated. 
3. After running this command, confirm that the system runs properly. 
Have you read danger alert message carefully?(y/n)y 
Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181575

Views: 642793

Downloads: 30

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next