No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.

Advanced O&M Command Reference
OceanStor 2800 V5 V500R007

This document is applicable to OceanStor 2800 V5. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).


The command is used for one-click log collection.

Format [ -f xxx.tar.bz2 ] [ -a ] [-F] | [ -p ]





-f xxx.tar.bz2 Specifies a name for a compressed log file. The file name extension must be .tar.bz2. This parameter can be used together with other parameters excluding p.


-a Backs up all log files by one-click log collection.


-F Log collection items, whose size is not restricted, is forced to be collected.


-p Checks whether available memory is sufficient for log collection. This parameter must be used independently.



Minisystem mode

Usage Guidelines

  • One-click log collection is designed to assist commissioning and O&M engineers with system log collection when a system runs incorrectly or a routine maintenance is performed.Logs collected can help commissioning and O&M engineers troubleshoot the fault or learn about the running status of the system.
  • If you do not enter any parameter, collected logs will be stored to /tmp/backup_info.tar.bz2, where /tmp is the directory where logs are stored by default, and backup_info.tar.bz2 is the default name of a log file.
  • Precautions:

-p: checks whether remaining memory is sufficient for log collection. The minimum available memory for all logs collection is 300 MB, and for recent logs collection is 160MB. You can view the check result in log /OSM/log/cur_debug/messages (inputting OS_CreatePolicy for searching).


Check whether available memory is sufficient for log collection.

Storage: minisystem> -p
/usr/bin/ memory is sufficient.

System Response


Updated: 2020-03-19

Document ID: EDOC1000181575

Views: 787150

Downloads: 37

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next