Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
showrootfsinfo
Function
The showrootfsinfo command is used to query files in the cache and print the files into the "messages" file.
Usage Guidelines
This command takes effect only on the local controller. If you want to export files from the cache of another controller, run this command on the controller.
Example
Query files in the cache and print the files into the "messages" file.
Storage: minisystem> showrootfsinfo Execute the command showrootfsinfo success.
System Response
The following table describes the parameter meanings.
Parameter |
Meaning |
|---|---|
| Execute the command showrootfsinfo success. | Indicates that the "showrootfsinfo" command has been successfully executed. |
| Execute the command showrootfsinfo failed. | Indicates that the "showrootfsinfo" command failed to be executed. |
Previous
