adm show array
Function
The adm show array command is used to show the information about all disk arrays.
Format
adm show array
Parameters
None
Views
Diagnostic view
Usage Guidelines
None
Example
To show the information about all disk arrays, run the following command.
admin:/diagnose>adm show array
arrayid(512) status(Running) fclinknum(1) iscsilinknum(0) lunnum(0) onlineflag(0) ctrloutflg(0)
sn(--) wwn(--) alias(Default) vendor(--) product(--) reversion(--) event(0) reporttime(0)
arrayid(513) status(Offline) fclinknum(0) iscsilinknum(0) lunnum(0) onlineflag(0) ctrloutflg(0)
sn(210235G7K410D9000005) wwn(--) alias(HUAWEI_S3900-M300_513) vendor(HUAWEI ) product(S3900-M300 ) reversion(2105) event(0) reporttime(0)
arrayid(514) status(Running) fclinknum(1) iscsilinknum(0) lunnum(0) onlineflag(1) ctrloutflg(0)
sn(210235G6TFZ0CC000039) wwn(--) alias(HUAWEI_S2900_514) vendor(HUAWEI ) product(S2900 ) reversion(2105) event(0) reporttime(0)
System Response
The following table describes the parameter meanings.
Parameter |
Meaning |
|---|---|
arrayid |
ID of the heterogeneous disk array. |
status |
Status of the heterogeneous disk array. |
fclinknum |
Number of Fibre Channel links. |
iscsilinknum |
Number of iSCSI links. |
lunnum |
Number of external LUNs. |
onlineflag |
Online bitmap. |
ctrloutflg |
Offline bitmap. |
sn |
SN of the heterogeneous disk array. |
wwn |
WWN of the heterogeneous disk array. |
alias |
Alias of the heterogeneous disk array. |
vendor |
Vendor of the heterogeneous disk array. |
product |
Product model of the heterogeneous disk array. |
reversion |
Version of the heterogeneous disk array. |
event |
Event type. |
reporttime |
Event report time. |
Previous
