Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change nfs nfsv3_forward_switch
Function
The change nfs nfsv3_forward_switch command is used to enable or disable NFS IO forwarding.
Parameters
Parameter |
Description |
Value |
|---|---|---|
| status=? | Switch status. | The value can be "enable" or "disable", where:
|
