Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show port fc_long_dis_perf
Function
The show port fc_long_dis_perf command is used to query the status of remote transmission optimization function on the FC port.
Format
show port fc_long_dis_perf fc_port_id=?
Parameters
Parameter |
Description |
Value |
|---|---|---|
fc_port_id=? |
ID of a port. |
To obtain the value, run "show port general". |
Views
Developer view
Usage Guidelines
Before performing the operation, confirm that the FC port supports the remote transmission optimization function.
Example
Query the status of remote transmission optimization function on the FC port whose ID is "CTE0.A.H0". The ID and command output vary with the products.
developer:/>show port fc_long_dis_perf fc_port_id=CTE0.A.H0
FC Long Distance Performance Optimization Enable:Yes
System Response
The following table describes the parameter meanings.
Parameter |
Meaning |
|---|---|
FC Long Distance Performance Optimization Enable |
Status of remote transmission optimization function on the FC port. |
Previous
