Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
system
This section describes commands related to system.
- backup configuration_data
- c_mem showmem
- change cluster controllers
- change cluster master
- change controller offline
- change controllers_expansion cancel
- change disk_domain meta_backup
- change iotrace switch
- change system cache
- change system config_model
- change system config_msg_status
- change system ib_copy_switch
- change system maintenance_ip
- change system reclaim_metavol_flag
- change system task_status
- change system work_mode
- clear configuration_data
- import oem_package
- reboot controller
- reboot ism
- reboot system
- restore oem_package
- restore system factory_mode
- show iotrace switch
- show system command_list
- show system configuration_log
- show system ib_copy_switch
- show system maintenance_ip
- show system trace
- show system trace_with_type
- show system work_mode
- sys showcallback
- sys showcfgcmdhistory
- sys showcfglog
- sys showclm
- sys showcls
- sys showcmdhistory
- sys showcmdlist
- sys showdblock
- sys showdiflevel
- sys showdirtydataflag
- sys showflowstatus
- sys showflowtrace
- sys showfrustatus
- sys showfsminiloadtime
- sys showglunlock
- sys showgpoollock
- sys showlicswitch
- sys showlockhandle
- sys showlog
- sys showlunlock
- sys showmem
- sys showmigedlun
- sys showmultivnodeswitch
- sys shownofcls
- sys showobjstatus
- sys showpoollock
- sys showsyslock
- sys showtrace
