Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change global_task_restrict switch
Function
The change global_task_restrict switch command is used to turn on or turn off the global task control switch. Global tasks do not include foreground I/O tasks, but include data repair, fault recovery, configuration, private I/O, and new device access tasks.
Parameters
Parameter |
Description |
Value |
|---|---|---|
| switch | Switch. |
|
Usage Guidelines
You can execute the "show global_task_restrict switch" command to show the switch status.
Example
Turn off the global task control switch.
developer:/>change global_task_restrict switch switch=off DANGER: You are about to enable or disable the global task management function. After this operation, if exceptions occur, some background tasks of the disk array are not allowed to be executed again for six hours. Suggestion: Before performing this operation, confirm that you want to enable or disable the global task management function. Have you read danger alert message carefully?(y/n)y Are you sure you really want to perform the operation?(y/n)y Command executed successfully.
