No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 2800 V5 V500R007

This document is applicable to OceanStor 2800 V5. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show tgt_switch caw_feature

show tgt_switch caw_feature


The show tgt_switch caw_feature command is used to show the switch status of storage devices' VAAI hardware-assisted locking function.


show tgt_switch caw_feature




Developer view

Usage Guidelines



Show the switch status of storage devices' VAAI hardware-assisted locking function.

developer:/>show tgt_switch caw_feature
Switch Type: Hardware-Assisted Locking Feature
Switch Status: Off

System Response

The following table describes the parameter meanings.



Switch Type

Switch type.

Switch Status

Switch status. The value is "On" or "Off".

Updated: 2020-01-17

Document ID: EDOC1000181575

Views: 728040

Downloads: 32

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next