No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 2800 V5 V500R007

This document is applicable to OceanStor 2800 V5. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
cliget -d i2cread

cliget -d i2cread

Function

The cliget -d i2cread command is used to read information about i2c.

Format

cliget -d i2cread parm1 parm2 parm3 parm4 parm5

Parameters

Parameter

Description

Value

parm1 i2c bus number.

The value ranges from 0 to 11.

parm2 IP address of the standby server.

The value ranges from 0x0 to 0xFF.

parm3 LBA address length.

The value ranges from 0 to 2.

parm4 Offset address.

The value ranges from 0x0 to 0xFFFF.

parm5 Read length.

The value ranges from 1 to 20.

Modes

serial port mode

Usage Guidelines

None

Example

  • Read the component whose secondary address is 0xe2, LBA address is 0x0, and offset is 0 from bus i2c3. The command output varies depending on a specific product.

    administrator@SMM_6U / $ cliget -d i2cread 3 0xe2 0x00 0x00 1
    ****enter data start***
    [3]--[e2]--[0]--[0]--[1]--
    *****end****
    i2c_chan[3] tx_len=[1] Readlen[1]
    ***Tx buf***
    [e2]-[ff]-[ff]-[ff]-[ff]-
    ***END***
    open i2c init ok
    I2C Readsucess
  • Read the component whose secondary address is 0x26, LBA address is 0x1, and offset is 0x10 from bus i2c10. The command output varies depending on a specific product.

    iBMC:/->cliget -d i2cread 10 0x26 1 0x10 3
     
    ****enter data start***
    [a]--[26]--[1]--[10]--[3]--
    *****end****
     i2c_chan[10] tx_len=[2] Readlen[3]
    ***Tx buf***
    [26]-[10]-[ff]-[ff]-[ff]-
    ***END***
    open i2c init ok
     Readsuccess:[1c]--[89]--[31]--

System Response

None

Translation
Download
Updated: 2020-01-17

Document ID: EDOC1000181575

Views: 724994

Downloads: 32

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next