No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.

Advanced O&M Command Reference
OceanStor 2800 V5 V500R007

This document is applicable to OceanStor 2800 V5. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
sys showddrealinfo

sys showddrealinfo


The sys showddrealinfo command is used to query the specified object dynamic data (DD) information in real time.


sys showddrealinfo {table name} {table id}





table name DD table name.

To obtain the value, run the "sys showallddtable" command.

table id DD table ID.



Diagnostic view

Usage Guidelines



Query the DD information about object "DD_CPU_S" whose ID is "0".

 admin:/diagnose>sys showddrealinfo DD_CPU_S 0
 CPU:id = CTE0.A.0
 CPU:parentType = 207
 CPU:parentID = 0
 CPU:healthStatus = 1
 CPU:coreTemp = 43
 CPU:volts = 16
 CPU:eCCError = null
 CPU:workFrequency = 2100
 CPU:currentFrequency = 2101
 CPU:frequencySwitch = 1

System Response


Updated: 2020-03-19

Document ID: EDOC1000181575

Views: 783410

Downloads: 37

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next