No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade
Advanced O&M Command Reference
OceanStor 2800 V5 V500R007

This document is applicable to OceanStor 2800 V5. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
pmgr showdisk

pmgr showdisk

Function

The pmgr showdisk command is used to view information about member disks in a disk domain.

Format

pmgr showdisk -p poolId

Parameters

Parameter

Description

Value

poolId ID of the disk domain.

To obtain the value, run the "show disk_domain general" command in super administrator mode.

Views

Diagnostic view

Usage Guidelines

None

Example

View information about member disks in a disk domain.

admin:/diagnose>pmgr showdisk -p 0

 diskId | disk_Status | isReconFinish | isReconNoSpace | isSoftReconSuccess | timerId | tier_type | dgId | subDgId 
 512      DISK_NORMAL   NO              NO               NO                   0x0       TYPE_SAS    0x4020     0x0       
 513      DISK_NORMAL   NO              NO               NO                   0x0       TYPE_SAS    0x4020     0x1       
 514      DISK_NORMAL   NO              NO               NO                   0x0       TYPE_SAS    0x4020     0x0       
 515      DISK_NORMAL   NO              NO               NO                   0x0       TYPE_SAS    0x4020     0x0       
 516      DISK_NORMAL   NO              NO               NO                   0x0       TYPE_SAS    0x4020     0x1       
 517      DISK_NORMAL   NO              NO               NO                   0x0       TYPE_SAS    0x4020     0x1       
 518      DISK_NORMAL   NO              NO               NO                   0x0       TYPE_SAS    0x4020     0x0       
 519      DISK_NORMAL   NO              NO               NO                   0x0       TYPE_SAS    0x4020     0x0       
 520      DISK_NORMAL   NO              NO               NO                   0x0       TYPE_SAS    0x4020     0x1       
 521      DISK_NORMAL   NO              NO               NO                   0x0       TYPE_SAS    0x4020     0x1

System Response

The following table describes the parameter meanings.

Parameter

Meaning

diskId

Disk ID.

disk_Status

Disk status.

isReconFinish

Whether disk reconstruction is complete.

isReconNoSpace

Whether hotspare space exists during disk reconstruction.

isSoftReconSuccess

Whether soft reconstruction is successful.

timerId

ID of the task timer during reconstruction.

tier_type

Tier type.

dgId

Disk group ID.

subDgId

Disk subgroup ID.

Translation
Download
Updated: 2020-03-19

Document ID: EDOC1000181575

Views: 783431

Downloads: 37

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next