Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
rm showluntopairinfo
Parameters
Parameter |
Description |
Value |
|---|---|---|
| lunId | LUN ID. | To obtain the value, run the "show lun general" command. |
Example
To query the remote replication on LUN 0, run the following command.
admin:/diagnose>rm showluntopairinfo 0 pairId1 :0x200bc79fabc80000 pairId2 :0xffffffffffffffff mstpairId1 :0x200bc79fabc80000 mstpairId2 :0xffffffffffffffff
System Response
The following table describes the parameter meanings.
Parameter |
Meaning |
|---|---|
| pairId1 | ID of the first remote replication on the LUN maintained by the working controller. |
| pairId2 | ID of the second remote replication on the LUN maintained by the working controller. |
| mstpairId1 | ID of the first remote replication on the LUN maintained by the master end in the cluster. |
| mstpairId2 | ID of the second remote replication on the LUN maintained by the master end in the cluster. |
