No relevant resource is found in the selected language.
Your browser version is too early. Some functions of the website may be unavailable. To obtain better user experience, upgrade the browser to the latest version.
This document is applicable to OceanStor 2800 V5. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change fsa open_lock
change fsa open_lock
Function
The change fsa open_lock command is used to change the status of the open lock.
Format
change fsa open_lock status=? [ controller=? ]
Parameters
Parameter
Description
Value
status=?
Status of the open lock.
The value is in the format of "enable" or "disable", where the "enable" is switch on and "disable" is switch off.
controller=?
Controller ID.
The value is in the format of "XA","XB" or "XC", "XD", where the "X" is an integer from 0 to 3, for example: "0A", "1C".