Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
logzone show logid
Parameters
Parameter |
Description |
Value |
|---|---|---|
| logid=? | Log ID. | The value is log ID (64-bit hexadecimal numbers with prefix 0x). |
Example
View information of a single log of logzone.
admin:/diagnose>logzone show logid logid=0x0100000000039825 0x0100000000039825: Index : 0 Type : 1 Node : 0 SrcWnode: 0 Wnode : 0 SerNum : 235557
System Response
The following table describes the parameter meanings.
Parameter |
Meaning |
|---|---|
| Index | Log index. |
| Type | Log zone type. |
| Node | ID of the node that the owns the log. |
| SrcWnode | ID of the node that initiates the write operation. |
| Wnode | ID of the node that executes the write operation. |
| SerNum | Serial number of log. |
