Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
mrr showfsraction
Function
The mrr showfsraction command is used to view the count of requests processed by the file system repair module. If an incorrect request exists, this command can be used to locate it.
Example
View the count of requests that execute ub return action.
admin:/diagnose>mrr showfsraction -t 1 Counter Type Step Name Received Return Ok Return Bad Not Return -------------- ------------------------------------------ --------------------- --------------------- --------------------- --------------------- UbReturnAction check repair status 0 0 0 0 UbReturnAction enter offline repair env 0 0 0 0 UbReturnAction backup ub 0 0 0 0 UbReturnAction export cache dirty data to backup fs 0 0 0 0 UbReturnAction del fs volume cache dirty data 0 0 0 0 UbReturnAction get max tx number 0 0 0 0 UbReturnAction get grain bp 0 0 0 0 UbReturnAction get grain sta 0 0 0 0 UbReturnAction get spc data 0 0 0 0 UbReturnAction get spc space 0 0 0 0 UbReturnAction repair grain 0 0 0 0 UbReturnAction on new ubnode update ub 0 0 0 0 UbReturnAction on max ub tx num update ub grain stat 0 0 0 0 UbReturnAction offline fs 0 0 0 0 UbReturnAction online fs 0 0 0 0 UbReturnAction get ub time 0 0 0 0 UbReturnAction get ddup space info 0 0 0 0 UbReturnAction set grain ddup info 0 0 0 0 UbReturnAction update grain bp 0 0 0 0 UbReturnAction revert ub 0 0 0 0 UbReturnAction update ub loop 0 0 0 0 UbReturnAction update fs status 0 0 0 0 UbReturnAction exit offline repair env 0 0 0 0 UbReturnAction confirm check repair status 0 0 0 0 UbReturnAction move dirty data to lost + found 0 0 0 0 UbReturnAction delete backup dirty data 0 0 0 0 UbReturnAction delete local ub file 0 0 0 0 UbReturnAction cancel check repair status 0 0 0 0 UbReturnAction import cache dirty data 0 0 0 0 UbReturnAction delete local env file 0 0 0 0
System Response
The following table describes the parameter meanings.
Parameter |
Meaning |
|---|---|
| Counter Type | Request type. |
| Step Name | Request name. |
| Received | Count of received requests. |
| Return Ok | Count of requests that are correctly returned. |
| Return Bad | Count of requests that fail to be returned. |
| Not Return | Count of requests that are not returned. |
Previous
