No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 2800 V5 V500R007

This document is applicable to OceanStor 2800 V5. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change file_system_possessed general

change file_system_possessed general


The change file_system_possessed general command is used to set the file system possess.


change file_system_possessed general file_system_id_list=? possess_type=? possess_number=?





file_system_id_list=? ID of the file system whose setting must be changed.
  • Run the "show file_system general" command without any parameters to obtain the value.
  • Multiple IDs are separated by commas (,), or ID range separated by hyphens(-).
possess_type=? Possess type whose setting must be changed.

The value can be page or chunk.

possess_number=? Possess size whose setting must be changed.

The value can be page or chunk.

  • The value of page is an integer between 32,768 and 999,999,999.
  • The value of chunk is an integer between 8,192 and 999,999,999.


Developer view

Usage Guidelines



Sets the possess information of the file system whose ID is 0. Sets the possess type to page and possess size to 65536.

developer:/>change file_system_possessed general file_system_id_list=0 possess_type=page possess_number=65536
WARNING:You are about to modify the available cache quantity of file system. This operation will cause cache resource to be re-allocated, then system performance may be degraded.
Suggestion:Before performing this operation, ensure that the correct parameter is configured.
Have you read warning message carefully?(y/n)y
Are you sure you really want to perform the operation?(y/n)y
Change possessed of file system 0 successfully.

System Response


Updated: 2020-01-17

Document ID: EDOC1000181575

Views: 724990

Downloads: 32

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next