Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
pal adel show all
Function
The pal adel show all command is used to show information about objects that are asynchronously deleted.
Parameters
Parameter |
Description |
Value |
|---|---|---|
| fsid | File system ID. | To obtain the value, run the "show file_system general" command without parameters. |
Example
Showing information about objects that are asynchronously deleted.
admin:/diagnose>pal adel show all 0
All File Count in This Controller : 0
Task Switch Status : ON
Timer ID : 13
File System ID index : 0xffffffff
File System Number : 0
Truncate size one time : 33554432
Show all of AsynDel Info in FS(ID:0):
Adel Index : 0
Check Time : 1458802613
Async Delete Task Status : idle
Adel Remain File Count : 0
Adel Removed File Size : 103809024
Adel File System Loaded Status : YES
Adel Object Area : from 13 to 29
-----------Adel_List_ID-------FileCounts----------LastFid----
13 0 0
14 0 0
15 0 0
16 0 0
17 0 0
18 0 0
19 0 0
20 0 0
21 0 0
22 0 0
23 0 0
24 0 0
25 0 0
26 0 0
27 0 0
28 0 0
29 0 0
System Response
The following table describes the parameter meanings.
Parameter |
Meaning |
|---|---|
| Adel_List_ID | ID list of objects that are deleted asynchronously. |
| FileCounts | Number of files in the asynchronous deletion queue. |
| LastFid | Large files that have not been deleted yet last time in the asynchronous deletion queue. |
